A PCB/panel set for the 2WAY dual switch module - all you need to do is provide components and solder them in place.
You will need:
a Dremel or similar tool to deburr the edges of the boards (if required)
6x PJ301M-12 jacks (aka. ThonkIconn)
2x switches of your choice
Solder the parts into place, fit the faceplate and off you go - simple as that. If you can hold a soldering iron at the first attempt without burning your fingers, you can build this.
Note that the switches must have solder pin connections at 2.54mm centres (eg. DailyWell DW1/DW2) - if you use anything else you'll need to get creative with wiring.
