Skip to product information
1 of 5

York Modular

DTM-8 - 8-channel passive desktop mixer (PCB set)

DTM-8 - 8-channel passive desktop mixer (PCB set)

Regular price £14.99
Regular price Sale price £14.99
Sale Sold out
Shipping calculated at checkout.
Quantity

The perfect beginners project - not only is this 8-channel passive mixer simple to put together, it doesn't require many components either. There are three boards - the base, the mainboard and the faceplate; it should be fairly obvious which is which ...

It's also a desktop-friendly form factor, measuring 138mm(W) x 43mm(D) x 15mm(H)

You'll need the following components.

  • 9x PJ302 (or equivalent) right-angle 3.5mm mono jacks - 8 for inputs, 1 for the output
  • 8x resistors - since this is a passive device, you need to be mindful of the voltage drop across the mixing resistors. 10k is a good trade-off value.
  • 8x Alpha RK097N (or equivalent) potentiometers - 100k linear taper recommended, but you could also use whatever you have lying around. You'll also need knobs too, unless you're going for a minimalist look ...
  • Appropriate standoffs to separate the boards - the mounting holes are M3 (3.2mm); the following are suggested:
    • 4x 10mm standoffs to separate the top and main boards
    • 4x 3mm standoffs to separate the base and main boards
    • 8x M3x8mm machine screws (to hold it all together)

I will also be offering a small number of pre-built units.

 

View full details