G8SEQ: 8-step gate sequencer with reset (6HP - partial build)

This is a PCB/panel set for the G8SEQ 8-step gate sequencer.🔗

All surface-mount components have been pre-soldered by the fabricators - it is up to you to provide the necessary through-hole componentry to complete the build. 

The following parts are required to complete the build:

• 10x PJ301M-12 (aka THONKICONN) or equivalent jacks
• 8x LEDs - I recommend Vishay TLHR4400🔗 LEDs, as they have a voltage drop of only 2V.
• Power cable, connector and mounting hardware.
  

Two points to note:

1. With the front of the board facing up, the LED cathodes are on the left hand side - I will add silkscreen markings to future board runs.
2. The gate output of each stage is approximately 10V (12V supply voltage less 2V drop for each diode => 10V) - keep this in mind when connecting to other modules.

US CUSTOMERS PLEASE NOTE: since no additional assembly is done, the country of origin of these boards is China. Complete modules will have the COO listed as the United Kingdom as I do all the necessary assembly and testing prior to shipping.