8-step CV sequencer with reset (6HP - FR4 panel)
Sequencers - everybody needs 'em.
The original SEQ8 module was one of the first ones that I made with a run larger than 3 - the 8.2 is an updated version.
It shares all of the features of its older sibling - 8-step, adjustable CV on each step and reset functionality, with reset on power-up as standard. However, the updated version is now 6HP wide rather than 10HP - the same functionality in a little over half the space.
Both clock and reset will trigger on the rising edge of an incoming signal - furthermore, the sequencer will be held at step 1 for as long as the reset signal is high. Counting will not resume until the reset signal goes low again.
Like the older version, it uses Alpha pots but with Befaco 'micro' knobs rather than the full size Davies style (whilst Davies knobs will likely fit, the spacing will be very tight)
These modules will be fitted with panels made from FR4 fibreglass - the panels have a dark grey finish with gold ENIG lettering
Current consumption: 15-20mA on +12V, does not use -12V.