6-way power splitter (PCB or fully assembled)

A 6-way power splitter for your low-voltage feeds - ideal for things like powering multiple LED lights from a single feed

Available as a bare PCB if you want to build it up yourself, or as a complete unit with screw terminals and decoupling capacitors on each of the output lines - if you're going down the DIY route, you can choose whether or not to fit the decoupling caps (I recommend 100nF ceramic caps). There are also has a pair of M3 mounting holes to allow attachment under your baseboard or similar.

Pay attention to polarities when wiring up - the ground terminals have a small arrow on the silkscreen and square board pads.

The bare board measures approximately 80mm x 25mm, and is around 13mm tall if screw terminals are fitted.

NOTE: screw terminal colours will vary - if this bothers you, purchase the PCB and add your own terminals to suit.