Free UK Shipping.

DIV2: 4HP power-of-two clock divider for Eurorack synthesisers


I thought long and hard about how to make a clock divider sound sexy.
I gave up.

This is the successor to my original divider module (and it's short-lived 1U counterpart) but is slightly different in that it now has divisions down to /64 - that's it. For best results, use a trigger voltage of around 5-6V (more is better, within reason) although anything above around 2V will work. At audio frequencies you could even use it as a sub-octave generator, and feeding individual outputs into a R2R DAC can yield some interesting sounds.

Note that the divider will trigger on the *falling* edge of a clock pulse - this is a 'feature' of the 4040 IC on the board; you can get around this by either using an 'inverted' clock input to the divider or using the divided signal as a 'master' clock source.

Exciting, eh? Nothing to see here, move along.

100% hand-made with surface-mount components, the panels are laser-cut and engraved 3mm perspex in opaque black.
Mounting hardware (M3x10 machine screws) and a power cable are also supplied.

CURRENT CONSUMPTION: 50mA max (+12V), 0mA (-12V)

£0.00 £35.99
Earn 0 reward points

The item has been added to your basket

Continue Shopping
Proceed To Checkout
  • Paypal
  • Mastercard
  • Visa
  • Maestro