BIAS2: Dual voltage-controlled bias/offset module (4HP)
BIAS2: Dual voltage-controlled bias/offset module (4HP)
BIAS2: Dual voltage-controlled bias/offset module (4HP)
BIAS2: Dual voltage-controlled bias/offset module (4HP)

BIAS2: Dual voltage-controlled bias/offset module (4HP)

10 in stock.

Regular price £39.99 £0.00 Unit price per
Shipping calculated at checkout.

A companion to the BIAS dual-offset module.

Whereas the BIAS module can act as a voltage source, BIAS2 takes it a step further and allows you to bias an input with an external source, the level of which can be controlled by the on-board attenuators - given an input, the output will be biased by whatever voltage is presented on the corresponding BIAS input; this gives you another way to modulate a signal.

4HP wide - supplied with mounting hardware and power cable.


WHAT DOES IT DO? Unlike the BIAS module, the BIAS2 will allow you to apply a varying offset to an incoming signal. Simply, for each channel the input signal will be offset by whatever voltage is applied to the 'OFFSET' input, which is in turn affected by the attenuator potentiometer associated with the channel.

A typical use case might involve a pair of sequencers (sequencer 1 being clocked at a slower rate than sequencer 2) running through a BIAS2 module - the CV from one of the sequencers can be used to modulate the CV of the other, thus allowing the creation of sequenced progressions.

If you'd prefer something which can apply a constant offset and/or act as a voltage source then the BIAS module is probably what you're looking for.

Share this Product