B-GRADE: VACLPG passive vactrol low-pass gate (2HP)
5 in stock.
B-GRADE? WHY?! Look carefully at the top-left corner of the faceplate - I forgot to instruct the fab not to add the batch number to the silkscreen and they put it there. I'm not willing to ditch a run of boards because of a silkscreen error so I'm selling these at a reduced cost.
If you don't like the look you can either flip the faceplate over (the other side is mostly blank) or use a black Sharpie to cover up the offending digits. Personally, I think it looks kinda cool.
This is pretty much your bog-standard vactrol LPG - there's an 'external' pot for CV level and a trim-pot on the rear to control the amount of current through the LED part of the vactrol (this also affects the signal LED). You can switch between two capacitors (47nF and 470nF as supplied - you can change these if you're handy with a soldering iron) to alter the character of the output.
Since this is a passive module, you may need to add a bit of post-amplification to the output signal - fortunately, I've got a module that will do that for you.
2HP wide - mounting hardware included. Black FR4 faceplate with ENIG lettering.