Prices include UK shipping.

GLIDE: dual glide/portamento buffer (4HP)


The return of the dual glide buffer - get all wibbly-wobbly with your control voltages.

Unlike similar modules such as the ADSR or DV3, this module has a single pot which controls the slew of an incoming signal - this means that both attack and decay will be approximately equal. Two ranges are offered, one 'short' (uses a 330nF capacitor) and the other 'long' (uses a 2.2uF capacitor) - these yield maximum attack/decay times of around 0.4s and 2.2s, respectively. If you're handy with a soldering iron and are confident with surface-mount componentry then you can swap these out if they're not quite doing it for you.

Note that feeding audio signals through this module will have little or no discernable effect - the capacitors are far too large to cope with signal changes at audio rates; this module is designed for use with control voltages.

100% hand-made with surface-mount components, the panels are laser-cut and engraved 3mm perspex in opaque black.

Mounting hardware (M3x10 machine screws) and a power cable are also supplied.

£0.00 £34.99
Earn 0 reward points

The item has been added to your basket

Continue Shopping
Proceed To Checkout
  • Paypal
  • Mastercard
  • Visa
  • Maestro